| Item Description |
Price
|
| |
| Velo Rossa - Complete Fiberglass Kit. Includes
all exterior fiberglass panels except fuel filler (add below), other hardware
can be purchased separately (see "Required
Parts," and "Optional Parts,"
below) or from other sources. $5405 |
$ 5405 |
| VR Rear Clip "Starter Kit,"
includes rear clip, trunk lid, and windshield header cap (add fuel filler
choice). Can be installed "stand alone" without the rest of the
Velo Rossa kit. Front end components can be installed later (but total build
cost may be slightly more due to crating shipping cost). |
$ 2285 |
| VR Coupe Kit, Leave the
stock roof on, eliminate trunk lid, header cap. Includes bonnet, hinge,
1st gen cheek panels, door skins, pre-cut rear tub, add fuel filler choice
below. $5570 |
$ 5570 |
| Individual VR Fiberglass
Parts
For mounting parts by themselves, building a kit a piece at a time,
collision repair,
or building replicas using parts from more than one manufacturer. |
| Bonnet (Front End, includes hinge
ring and hinge bracket) |
$ 2350 |
| Rear Tub |
$ 1795 |
| Coupe Rear Tub, includes hatch-mounted spoiler |
$ 2450 |
| Coupe Rear Tub sail panels to cover quarter windows $95 each |
Pair $190 |
| Cheek Panels, 1st Generation, $195
each |
Pair $ 390 |
| New Style Cheek Panels (bolt
on instead of bonding, caps upper frame smoothly), $449 each |
Pair $ 898 |
| Cheek Update Panels, Upper part of new cheek panels for use
on previously-bonded 1st Gen cheeks, $195 each |
Pair $ 390 |
| Door Skins - $190 each |
Pair $ 380 |
| Fuel Filler Pocket, Rectangular
for Fiberglass Fuel Door (below) |
$ 69 |
| Fuel Filler Door (use with original
Z fuel door hinge, and Pocket, above) |
$ 49 |
| Optional Le Mans Fuel Filler
Pocket (use with Le Mans flip cap) |
$ 79 |
| Trunk Lid (with pre-bonded inner
panel) |
$ 395 |
| Header Cap (for top of windshield) |
$ 95 |
| |
| Subtle Z Fender Kit: Airdam, Fenders,
Quarter Panels |
$ 1934 |
| Front Fenders - pair |
$ 960 |
| Rear Quarter Panels- pair |
$ 595 |
| Airdam |
$ 379 |
| Cowl Induction Hood with Pre-Bonded
Reinforcing and Hinge Brackets |
$ 495 |
| Cowl Induction Hood Skin Only
for Racing Applications |
$ 295 |
| Fiberglass Stock Hood with Pre-Bonded
Reinforcing and Hinge Brackets |
$ 495 |
| Fiberglass Stock Hood Skin Only
for Racing Applications |
$ 295 |
| |
| Daytona ZX Spyder- Complete Fiberglass
Kit |
$ 5240 |
| Nose Clip |
$ 1950 |
| Hood |
$ 840 |
| Trunk Lid |
$ 495 |
| Rear Tub |
$ 1570 |
| Header Cap |
$ 95 |
| Door Skins - each |
$ 190 |
| Fuel Filler Door |
$ 30 |
| Bumpers - set of 4 pieces |
$ 949 |
| Bumper Mounting Brackets |
$ 149 |
| Taillights - see "Optional
Parts," below |
$ 449 |
| Front Turn Signal Lenses - pair |
$ 649 |
| |
| Rear Deck, Trunk Lid and Windshield
Header Cap |
$ 1395 |
| Premium Convertible Top - complete |
$ 1500 |
| Economy Convertible Top - complete |
$ 990 |
| Z Spyder Removable Hardtop (Fiberglass
shell only) |
$549 |
| Side Vents - pair |
$ 79 |
| Rear Repair Panel |
$ 199 |
The
ZX Spyder
Convertible Conversion
Kit, 1979-83 |
| Rear Deck, Trunk Lid and Windshield
Header Cap |
$ 1395 |
| Convertible Top - complete |
$ 1900 |
| Rear Spoiler |
$ 190 |
| |
| Complete Kit - Fenders, Quarter
Panels, Airdam |
$ 1710 |
| Fenders - pair |
$ 795 |
| Fenders
with Integrated Headlight Buckets (280 YZ only at this time) |
add $ 255 |
| Quarter Panels, pair |
$ 595 |
| Quarter
Panels with Stock-Appearing Wheel Well Lip/Flare (nice option to match
the Subtle front fenders, 280 YZ only at this time) |
add $ 95 |
| Quarter
Panel with Integrated Le Mans Fuel Filler Pocket |
add $ 95 |
| Airdam |
$ 320 |
Velo
Rossa Required Parts (some may be used on other kits) |
| Front Parking/Signal Lights - 2-inch behive
lenses, bright LED bulbs, bases, sockets and wiring, pair |
$ 110 |
| Taillights - 4-inch glass lenses, reflectors,
dual-filament bulbs, bases, sockets and wiring, set of 4 (all red, mount
side-by-side). |
$ 449 |
| Taillights - 2-inch behive lenses, bright LED
bulbs, bases, sockets and wiring, set of 4 (2 red + 2 amber, mount over-and-under
like original GTO). |
$ 269 |
| Body Adhesive, gallon |
$ 29 |
| Drywall Screws - box |
$ 15 |
| Aerosol Rigid Urethane Foam - three
cans |
$ 39 |
| Headlight Screws & Nuts - set |
$ 5 |
| Bonnet Latches - pair |
$ 29 |
| Fuel Filler Splice Tube (for early
Z-cars) |
$ 19 |
| Lengthened Fuel Filler Tube (for
early Z-cars) |
$ 39 |
| Pinch Molding (weather-stripping
and seals) |
$ 59 |
| Chassis Reinforcement Tubing -
set |
$ 299 |
| Shortened Front Struts with New
Cartridges - exchange |
$ 499 |
| Shorter Cartridges for Shortened
Struts - each |
$ 79 |
| Trunk Hinges - pair (complete with
gaskets, nuts, washers) |
$ 111 |
| Trunk Latch |
$ 39 |
Velo
Rossa Optional Parts & Accessories
(some may be used on other kits) |
| License Plate Frame - Chrome-Plated
Solid Cast Aluminum |
$ 29 |
| License Plate Light |
$ 14 |
| Italian-Style Steering Wheel |
$ 289 |
| Seat Cover Kit - Vinyl |
$ 289 |
| Seat Cover Kit - Leather |
$ 499 |
| Italian-style
Fiberglass Dash (Alphabet Version, click for photos) |
$ 345 |
| Italian-style
Fiberglass Dash (Simpson Version - more accurate) |
$ 345 |
| Oval Driving Lights - pair |
$ 179 |
| Driving Light, Trim Rings Only
- pair |
$ 99 |
| Headlight Covers - pair. Will
fit Eagle GTO, Alpha One GTO, and Blue Ray Rhino replicas, and are close
fit to McBurnie GTO kits. Dimensions are: Major axis 14.5 inches (36.8 cm);
Minor axis is 10 inches (25.4 cm). For international shipping please email
John@ReactionResearch.com
to verify shipping cost BEFORE submitting payment. I do not offer trim rings
at this time. Most of the "trim rings" on Velo Rossas you have
seen are actually painted on the inside of the headlight cover. |
$ 199
|
| Fuel Filler Cap, LeMans Style |
$ 149 |
| Door Mirrors, Cobra Style, Large
- pair |
$ 149 |
| Hub Extenders, each (allow use
of any modern wheel on the VR) |
$74.50 |
Wire Wheels
- Set of Four. True, tangent-spoked wheels, bolt-on instead of the much
heavier and more cumbersome knock-off-style. (Currently unavailable,
researching options, email
for more info) |
$ 2060 |
| Premium Convertible Top - complete |
$ 1500 |
| Removable Hardtop Shell (you add your own seals,
latches, window) |
$ 549 |
Assorted
Z Parts |
| Fiberglass Bumpers, 240Z, each |
$ 149 |
| Fiberglass Bumpers, 280Z 1977-1978, each |
$ 149 |
| Headlight Buckets (aka "doors"), 1970-1978, each |
$ 159 |
| Hatch, 1970-1978 |
$ 429 |
| Fiberglass Doors, each |
$ 345 |
| |
|
Crating
and Shipping |
| Crating Charge for Complete Body
Kits |
$ 350 |
| Crating Charge for Fender Kits
with Hood |
$ 225 |
| Crating Charge for Fender Kits
without Hood |
$ 175 |
|
| |
Velo Rossa Spyder Body Kit Installation
Manual  |
$ 25 |
| Haynes Service Manual |
$ 24 |
| Datsun Z V-8 Conversion Manual
|
$ 34 |
| Chevy TBI and TPI Engine Swapping |
$ 26 |
| How to Restore Your Datsun Z |
$ 28 |
| How to Hotrod and Race Your Datsun |
$ 29 |
| GTO
Poster |
$ 39 |
